2017年6月9日機械指令標準異動更新 時間: 2017-07-14 11:05:11
•EN ISO 10326-1:2016 Mechanical vibration - Laboratory method or evaluating vehicle seat vibration - Part 1: Basic requirements.

•EN 378-2:2016 Refrigerating systems and heat pumps – Safety and environmental requirements - Part 2: Design, construction, testing, marking and
documentation, which supersedes EN 378-2:2008+A2:2012 on 30 November 2017.

•EN 609-1:2017 Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters, which supersedes EN 609-1:1999+A2:2009 on 30 June 2018.

•EN 1570-2:2016 Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings
of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s.

•EN ISO 5395-2:2013/A1:2016 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013), 1st amendment, which supersedes the unamended standard on 30 June 2017.

•EN ISO 5395-3:2013/A1:2017 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013), 1st amendment, which supersedes the unamended standard on 31 August 2017.

•EN ISO 11111-1:2016 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016), which is effective from 30 November 2017.

•EN ISO 11111-2:2005/A2:2016 Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005), second amendment, which supersedes the previously amended standard with immediate effect.

•EN ISO 11111-3:2005/A2:2016 Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005), second amendment, which supersedes the previously amended standard with immediate effect.

•EN ISO 11111-4:2005/A2:2016 Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005), second amendment, which supersedes the previously amended standard with immediate effect.

•EN ISO 11111-5:2005/A2:2016 Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005), second amendment, which supersedes the previously amended standard with immediate effect.

•EN ISO 11111-6:2005/A2:2016 Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005), second amendment, which supersedes the previously amended standard with immediate effect.

•EN ISO 11111-7:2005/A2:2016 Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005), second amendment, which supersedes the previously amended standard with immediate effect.

•EN 12312-3:2017 Aircraft ground support equipment – Specific requirements - Part 3: Conveyor belt vehicles, which supersedes EN 12312-3:2003+A1:2009 on 31 July 2017.

•EN 12312-6:2017 Aircraft ground support equipment – Specific requirements - Part 6: Deicers and de-icing/antiicing equipment, which supersedes EN 12312-6:2004+A1:2009 on 30 September 2017.

•EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks.

•EN 13204:2016 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements, which supersedes EN 13204:2004+A1:2012 on 30 November 2017.

•EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates - Product standard, performance characteristics, which supersedes EN 13241-1:2003+A1:2011 on 30 June 2018.

•EN ISO 15012-4:2016 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016).

•EN 16851:2017 Cranes - Light crane systems.

•EN 60947-5-5:1997/A2:2017 Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function (IEC 60947-5-5:1997/A2:2016), 2nd amendment, which supersedes the previously amended standard on 24 February 2020.

•EN 62841-2-8:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers (IEC 62841-2-8:2016 (Modified)), which supersedes EN 60745-2-8:2009 on 2 May 2020.